Solid Back Biker Leather Vest
Solid Back Panel Biker Vest. An American classic vest, cut from a 1.4-1.6 mm (3 1/2-4 oz.) Soft, Supple and thick Cowhide Naked Leather. Solid back panel , easy to add patches or custom embroidery. Double sided leather interfacing, enables the vest to retain shape when carrying a concealed pistol or any heavy objects. Two leather-lined front pockets (approx. 4.5″ deep) and two inside leather lined pistol pockets (approx. 9″ deep) close with a snap on one side and the other with a zipper, both have a small internal pocket (4″ x 4″) for a gun barrel or cell phone. Antique Brass Hardware, Poly Twill an extremely durable liner. Club leather motorcycle vest. Motorcycle leather vest. .
Thickness or Weight – Leather is usually measured in terms of ounces. One ounce equals 1/64th of an inch thickness. Thus, a weight of 7 to 8 oz. means the leather is 7/64th to 8/64th of an inch thickness. In an effort to make leather a uniform thickness, wet hides are run through a splitting machine. However, each animal is different and there is always a slight thickness variation throughout the hide. This is why leathers are usually shown with a range of thickness, such as, 4 to 5 oz., 6 to 7 oz., etc.
Leather Thickness Conversion Chart
1 1/2 oz.
2 1/2 oz.
3 1/2 oz.
3 3/4 oz.
4 1/2 oz.
Adjustable Lace-up Sides
Chest: Measure under arms around the fullest part of the chest. Be sure to keep tape level across back and comfortably loose.