Double Stitched Leather Chaps. Functional, rugged, durable and attractive. Our chaps are hand-crafted and custom-Proudly made in Kissimmee, FL. Designed just for you and made to order. Double stitch, 1.6-1.8 mm (4-41/2 oz.) Soft, Supple, and Thick Cowhide Naked leather, YKK antique brass hardware..
Naked Leather, made from the finest raw material, are clean natural hides which have not been sanded to remove imperfections. Only the hair has been removed. The grain remains in its natural state which will allow the best fiber strength, resulting in greater durability. The natural grain also has natural breathability, resulting in greater comfort. The natural Naked Leather surface will wear better than other leather.
Thickness or Weight – Leather is usually measured in terms of ounces. One ounce equals 1/64th of an inch thickness. Thus, a weight of 7 to 8 oz. means the leather is 7/64th to 8/64th of an inch thickness. In an effort to make leather a uniform thickness, wet hides are run through a splitting machine. However, each animal is different and there is always a slight thickness variation throughout the hide. This is why leathers are usually shown with a range of thickness, such as, 4 to 5 oz., 6 to 7 oz., etc.
Leather Thickness Conversion Chart
1 1/2 oz.
2 1/2 oz.
3 1/2 oz.
3 3/4 oz.
4 1/2 oz.
Perma Core. A premium core spun sewing thread manufactured with continuous filament polyester core and polyester staple wrap for most sewing applications. The core spun construction delivers a thread with a higher strength and sewing performance over staple spun products, allowing for the use of smaller thread sizes. Perma Core maximizes seam quality while minimizing sewing problems. By American & Efird
Since the late of 1950, YKK has been building up the worldwide group network and running Good Quality Management System throughout the network. In 1997, YKK established the Quality Management Committee, called FGQMC (Fastening Global Quality Management Committee) to assure the quality of their products at global level and to satisfy our customer with safety and reliability on our products.
……………….Standard Size Chart
How to Measure:
Measurement should be taken with a comfortably snug. But not tight,tape. Measurement should be taken over the pants.
Your waist measurement is typically your jean’s waist size with 2 inches added. This provides enough room for your chaps to fit over your pants.
Measure the thickest part around the upper thigh at the crotch. This is a very important measurement. It is necessary for a correct fit.
From the crotch to desired length of the chap, usually an inch above the floor .Allow extra inseam length if boots are ever worn.
Reviewer: David L Lewis from Buckley, WA United States
I did a custom order on these, and they were made spot on, only problem I didn’t get it right on my end. I did a hot water treatment on them, and dried them using heat and they now fit very well. (not recommended unless you know what your doing) Very nice chaps, with good hardware.
With over 15 years of manufacturing motorcycle leather apparel, we are pleased to present to you the best brands in the leather industry. From garage made jackets and family-owned businesses to companies with a century of history. All-Star Leathers – Where The Elite Brands Converges.