Our Riding Chaps are built to last virtually forever, providing ultimate grip, comfort, and protection. Made from the finest heavyweight 1.6-1.8 mm (4-41/2 oz) Soft, Supple, and Thick Cowhide Naked leather. YKK hardware.
Seamless design(front only), a true example of old-school craftsmanship.
Flap over Zippers.
Heavy Duty YKK antique brass zippers.
Fully Adjustable Belt.
Laced Back Panel for Waist Adjustment.
Colors available: Black, Brown, and Distressed Brown
Naked Leather, made from the finest raw material, are clean natural hides which have not been sanded to remove imperfections. Only the hair has been removed. The grain remains in its natural state which will allow the best fiber strength, resulting in greater durability. The natural grain also has natural breathability, resulting in greater comfort. The natural Naked Leather surface will wear better than other leather.
Thickness or Weight – Leather is usually measured in terms of ounces. One ounce equals 1/64th of an inch thickness. Thus, a weight of 7 to 8 oz. means the leather is 7/64th to 8/64th of an inch thickness. In an effort to make leather a uniform thickness, wet hides are run through a splitting machine. However, each animal is different and there is always a slight thickness variation throughout the hide. This is why leathers are usually shown with a range of thickness, such as 4 to 5 oz., 6 to 7 oz., etc.
Leather Thickness Conversion Chart
Millimeters
0.6 mm
0.8 mm
1.0 mm
1.2 mm
1.4 mm
1.5 mm
1.6 mm
1.8 mm
2.0 mm
Ounces
1 1/2 oz.
2 oz.
2 1/2 oz.
3 oz.
3 1/2 oz.
3 3/4 oz.
4 oz.
4 1/2 oz.
5 oz.
Point
24 point
32 point
40 point
48 point
56 point
60 point
64 point
72 point
80 point
Decimal Inches
.024 inches
.032 inches
.040 inches
.048 inches
.056 inches
.060 inches
.064 inches
.072 inches
.080 inches
Thread
Perma Core. A premium core spun sewing thread manufactured with continuous filament polyester core and polyester staple wrap for most sewing applications. The core-spun construction delivers a thread with a higher strength and sewing performance over staple spun products, allowing for the use of smaller thread sizes. Perma Core maximizes seam quality while minimizing sewing problems. By American & Efird
YKK Zippers
Since the late of 1950, YKK has been building up the worldwide group network and running Good Quality Management System throughout the network. In 1997, YKK established the Quality Management Committee, called FGQMC (Fastening Global Quality Management Committee) to assure the quality of their products at a global level and to satisfy our customer with safety and reliability on our products.
Men’s Chaps
……………….Standard Size Chart
Sizes
XS
S
M
L
XL
2XL
Waist
31″
32.5″
34″
39″
44″
50″
Thigh
21″
22″
23″
25.5″
27.5″
29.5″
Inseam
30″
31.5″
32″
34″
35″
36″
How to Measure:
Measurement should be taken with a comfortably snug. But not tight, tape. Measurement should be taken over the pants.
Waist:
Your waist measurement is typically your jean’s waist size with 2 inches added. This provides enough room for your chaps to fit over your pants.
Thigh:
Measure the thickest part around the upper thigh at the crotch. This is a very important measurement. It is necessary for a correct fit.
Inseam:
From the crotch to desired length of the chap, usually an inch above the floor. Allow extra inseam length if boots are ever worn.